How to Disable Wi-Fi Protected Setup (WPS) in Your Router

To disable the Router PIN method:

1. Login to the router GUI by typing www.routerlogin.net on an Internet browser's address bar. ...
2. Go to Advanced Setup menu and select Wireless Settings.
3. Under WPS settings, put a check mark on Disable Router's PIN box. ...
4. Hit Apply button to save settings.

1. How do I disable WPS on my router?
2. Should I disable WIFI Protected Setup?
3. Where is the WIFI Protected Setup button on my router?
4. How do I turn off WPA?

How do I disable WPS on my router?

How to Disable WPS

1. Open a web browser, then type 192.168. 1.1 in the address bar.
2. Enter the administrator username and password (the default username is admin, and the default password is admin).
3. Select Advanced Settings > Wireless.
4. Choose WPS from the tab.
5. Move the Enable WPS toggle switch to the off position.

Should I disable WIFI Protected Setup?

Wi-FI Protected Setup (WPS) is Insecure: Here's Why You Should Disable It. WPA2 with a strong password is secure as long as you disable WPS. ... Your router probably supports WPS and it's likely enabled by default. Like UPnP, this is an insecure feature that makes your wireless network more vulnerable to attack.

Where is the WIFI Protected Setup button on my router?

On most routers, the WPS button is on the back of the router, alongside the Ethernet ports. Press it once, and WPS is enabled and working. You can then connect your wireless devices through WPS.

How do I turn off WPA?

1. Launch a Web browser, type "192.168. 1.1" into the address bar and press "Enter." Enter your router's username and password, if you have set them. ...
2. Click "Wireless" and select "Wireless Security."
3. Click the "Security Mode" drop-down menu and select "Disabled."
4. Click the "Save Changes" button.