How to Remove Write Protection on a USB Drive in Windows

Type “Attributes disk clear readonly” and press Enter. Yes, that word is spelled as “readonly.” Finally, wait for the write protection removal to finish, type “Exit“, hit Enter, and you'll exit Command Prompt. Restart your PC and try writing on the USB again after the system has rebooted.

1. How do I remove write protection from a USB drive in Windows 10?
2. How do I enable or disable write protection on a flash drive?
3. Why is my USB drive suddenly write protected?
4. How can I remove write protection from my USB?
5. How do I unlock a USB drive in Windows 10?
6. Can you make a USB stick read only?
7. How do I remove write protection from a SanDisk flash drive?
8. How do I make my USB readable?
9. Why is my USB Read Only?
10. Can T format USB the disk is write protected?
11. How do I remove write protection from a hard drive?
12. How do you unlock a locked USB?
13. How do I fix write protected media?

How do I remove write protection from a USB drive in Windows 10?

Remove Write Protection From USB Drives With 'regedit' in Windows 10 and Windows 8

1. Insert the USB drive into a USB port on your computer.
2. Press the Windows key+X.
3. Select Run.
4. Enter regedit and select OK.

How do I enable or disable write protection on a flash drive?

NTFS file system

1. In the Properties window, click the Security tab.
2. Click the Edit button below the Group or user names section.
3. In the Permissions window, click the Everyone entry, if not already selected. ...
4. Click the OK button on the Permissions and Properties window to save the security permissions change.

Why is my USB drive suddenly write protected?

Sometimes if the USB stick or SD card is full with files, it is very likely to receive the write protection error when files are being copied to it. ... If there is enough free disk space and you still encounter this issue, it might be because the file you are trying to copy to the USB drive is too large.

How can I remove write protection from my USB?

Method 2. Remove Write Protection from USB via Diskpart Command

1. Press "Win + R", type cmd to open "Command Prompt".
2. Type diskpart and hit Enter.
3. Type list disk and hit Enter.
4. Type select disk 2 and hit Enter.
5. Type attributes disk clear readonly and hit Enter.

How do I unlock a USB drive in Windows 10?

Unlock a USB drive with the Command Prompt:

1. Launch the Command prompt as Administrator, type the command Diskpart and press Enter.
2. Type list disk and press Enter.
3. Find the drive number corresponding to your flash drive. ...
4. Type attributes disk clear readonly and press Enter.

Can you make a USB stick read only?

When a file on the USB stick is set to Read Only it blocks the User from deleting or formatting the drive. However, this only works on the PC so if the USB is put into a Mac or Linux box, they can do whatever. Another easy way to make a USB drive Read Only is formatting the drive as NTFS.

How do I remove write protection from a SanDisk flash drive?

Type the following command lines and hit Enter each time:

1. list disk.
2. select disk # (# is the number of your SanDisk USB/SD card/SSD drive that you want to remove write protection from.)
3. attributes disk clear readonly.

How do I make my USB readable?

To make your USB drive “readable”, run the disk management utility as described above in Step 1. Then find and click on the required flash drive. There will be the description of the flash drive in the same window. Right-click on it and select Format.

Why is my USB Read Only?

The cause of this is due to the filing system the storage device is formatted in. ... The cause of the "Read Only" behavior is due to the format of the file system. Many storage devices such as USB drives and external hard disk drives come pre-formatted in NTFS because a larger number of consumers are using them on PCs.

Can T format USB the disk is write protected?

Cannot Format USB Drive Write Protected [Solved]

1. Insert the USB.
2. Don't open or format it directly.
3. Right click on my computer and go to manage.
4. In computer management window click on disk management option.
5. Right click on the removable disk.
6. Select format.

How do I remove write protection from a hard drive?

Type "chkdsk d: /f/r/x" in the command prompt window and press the Enter key. Again, replace the letter "d" with the drive that is write protected. The other letters direct the app to turn off read-only protection on the entire drive.

How do you unlock a locked USB?

How to Unlock USB Drive

1. Step 1: Connect the USB drive to your PC and go to Computer/This PC.
2. Step 2: Right-click the USB drive and choose "Properties" and then "Security".
3. Step 3: Click "Edit"and enter your administrator password.

How do I fix write protected media?

Fix The media is write protected error on internal hard drives

1. Run a full system scan. ...
2. Repair your registry using CCleaner. ...
3. Use Microsoft's System File Checker to check for system file corruption. ...
4. Update your OS. ...
5. Check your disk for errors. ...
6. Clean your temporary files and folders. ...
7. Use system recovery options.