How to Select and Set Up an HD TV Antenna

1. How do I choose an HDTV antenna?
2. Why is my TV antenna not picking up channels?
3. What is the most powerful TV antenna?
4. Does a smart TV need an antenna for local channels?
5. Does HDTV antenna work on regular TV?
6. Does aluminum foil boost antenna signal?
7. How do I check my antenna signal?
8. How do I know what frequency my TV is on?

How do I choose an HDTV antenna?

So, here's how you go about choosing the right antenna for you.

1. Determine which channels are available where you live.
2. Choose which channels you want to watch.
3. Check the rules on antenna installation where you live.
4. Figure out which type of antenna you need.
5. Select the antenna.

Why is my TV antenna not picking up channels?

It is important to check regularly for corrosion, loose cable fittings, or if a cable has been compromised. If you are using a splitter, this could also weaken signal strength. Try disconnecting the splitter and running the cable directly into the TV/converter box and run a channel scan.

What is the most powerful TV antenna?

Best amplified indoor TV antenna:Winegard FlatWave Amped (model FL-5500A) Best roof-mount TV antenna:Antennas Direct DB8e. Best attic/outdoor TV antenna:Winegard Elite 7550.

Does a smart TV need an antenna for local channels?

Does a smart TV need an antenna for local channels? Yes, to watch your local channels, you need an antenna designed to serve your locality. However, if you have a cable TV subscription, TV streaming services, or streaming devices, you don't have to get one if you are satisfied with the quality.

Does HDTV antenna work on regular TV?

There is no difference between a regular and a HDTV antenna. ... Any antenna can pick up HDTV signals. They are broadcast on the same frequencies that even the classic rabbit ears can pick up. The digital signal is, however, much less forgiving of bad antenna placement than analog signals were.

Does aluminum foil boost antenna signal?

Wrapping aluminum foil around your antenna will basically increase the surface area and conductivity of the antenna to boost the signal that your TV receives from it.

How do I check my antenna signal?

Tips for the Transmitter Locator Tool

1. Check to see if the digital channels in your area broadcast on the UHF or VHF band. Look at the column heading in dark blue for UHF or VHF. ...
2. Determine how far your antenna will be from the transmitters. ...
3. You might need a uni-directional or multi-directional antenna.

How do I know what frequency my TV is on?

You can locate the actual broadcast frequency channel at www.tvfool.com. Select the TV Signal Locator and enter your home address. The actual broadcast frequency channel will be shown along with the virtual channel in parentheses.